voltage fluctuation In the real world power line voltage occurs frequently especially in industrial area. Every electrical equipments and devices do have a working voltage limit/tolerance. Some equipment are build to tolerate ±10% of nominal voltage while others ±5% or less depending on sensitivity.
effects The correct operation of electrical and electronic equipment depends on the voltage accuracy and stability. In the event of long time over voltage, it will lead to damage of the equipment; while long time under voltage will cause malfunction and computation errors of the electrical & electronic equipment.
solutions Installing QPS Automatic Voltage Stabilizer (AVS) or power line conditioner will ensure the continuity and
quality of production.
Input voltage variation from:
Single Phase: 230VAC ±12%
Three Phase: 415VAC ±12% + Neutral (3 phase 4 wire)
– excellent output voltage accuracy of within ±1.5% set value.
– regulation correction time approximately 0.05 ~ 0.07 sec per volt.
– minimum maintenance due to its simplicity in design.
– easy installation.
– tailor made to special voltages and configuration for example, three phase voltage without neutral or for outdoor configurations.
QPS Servo – Motor Automatic Voltage Stabilizer provides a continuous monitoring of the output voltage
(true RMS sensing) by means of an electronic Control Circuit that compares the instantaneous output voltage with the set value. When changes are detected due to fluctuation of supply voltage or sudden changes in load, an electrical signal will be transmitted to the servo – motor which is coupled onto the brush gear of the variable transformer, causes the brush gear to rotate until the appropriate voltage is restored. This method of stabilization does not create interference or harmonic to the supply system. QPS Three phase Automatic Volltage Stabilizer also designed to cater for unbalanced load. This made possible with its independent phase monitoring system.
QPS Automatic Voltage Stabilizer offer high quality performance at competitive prices. They solve voltage unstable problems and increase productivity.
power line conditioner QPS power line conditioner (PLC) is a AVS with the inclusion of a shielded isolation transformer.
technical data input voltage · single phase: 230V ±12% · three phase: 415V ±12% + neutral
output voltage (true rms) · single phase: 230VAC ± 1.5% · three phase: 415VAC ± 1.5%
rated kva · single phase: 1KVA ~ 30KVA · three phase: 3KVA ~ 150KVA
standard features · over current circuit breaker · analog voltmeter · phase indicator lamps · phase selector switch for voltmeter (for three phase only)
optional features · surge protection device (SPD) · phase loss (3 phase model) c/w programmable under / over voltage detector / phase sequence monitoring · automatic output delay on system · manual bypass switch
single phase standard fittings
single phase models
standard fittings come with phase pilot lamp, over current breaker and voltmeter with selector switch.
three phase standard fittings over current breaker – (model 3KVA ~ 150KVA)
voltmeter input – line / phase voltage – (model 30KVA ~ 150KVA)
voltmeter output – (model 3KVA ~ 150KVA)
phase pilot lamp, input and output termination terminal block – (model 3KVA ~ 150KVA)
diagram Single Phase & Three Phase Servo – Motor Voltage Stabilizer Block Diagram
dimension
single phase V-series 230VAC technical specification
model
cabinet
power rated output (KVA)
rated / output current (A)
input voltage variation (%)
output accuracy
dimensions (mm) (+/-) h w d
weight (kg) (+/-)
VSS1 – 2
1
1
4
230V ± 12%
± 1.5%
183 200 220
8
VSS2 – 2
1
2
9
230V ± 12%
± 1.5%
200 230 245
10
VSS3 – 2
1
3
13
230V ± 12%
± 1.5%
283 260 330
23
VSS4 – 2
1
4
17
230V ± 12%
± 1.5%
283 260 330
24
VSS5 – 2
1
5
22
230V ± 12%
± 1.5%
283 260 330
24
VSS7 – 2
2
7.5
33
230V ± 12%
± 1.5%
370 270 560
45
VSS10 – 2
2
10
43
230V ± 12%
± 1.5%
370 270 560
50
VSS15 – 2
2
15
65
230V ± 12%
± 1.5%
370 270 560
53
VSS20 – 2
3
20
87
230V ± 12%
± 1.5%
640 400 375
57
VSS25 – 2
3
25
109
230V ± 12%
± 1.5%
640 400 375
68
VSS30 – 2
3
30
130
230V ± 12%
± 1.5%
640 400 375
73
remarks: The dimensions indicated above is applicable for Automatic Voltage Stabilizer only. Please refer to the staff for power line conditioner dimensions if required.
dimension
three phase V-series 415VAC
technical specification
model
cabinet
power rated output (KVA)
rated / output current (A)
input voltage variation (%)
output accuracy
dimensions (mm) (+/-) h w d
weight (kg) (+/-)
VST3 – 4
1
3
4
415V ± 12%
± 1.5%
530 295 460
32
VST6 – 4
1
6
8
415V ± 12%
± 1.5%
530 295 460
36
VST10 – 4
1
10
14
415V ± 12%
± 1.5%
660 360 600
75
VST15 – 4
1
15
21
415V ± 12%
± 1.5%
660 360 600
78
VST20 – 4
1
20
28
415V ± 12%
± 1.5%
660 360 600
96
VST25 – 4
1
25
35
415V ± 12%
± 1.5%
660 360 600
107
VST30 – 4
1
30
42
415V ± 12%
± 1.5%
700 380 810
115
VST40 – 4
1
40
56
415V ± 12%
± 1.5%
700 380 810
128
VST45 – 4
1
45
63
415V ± 12%
± 1.5%
700 380 810
134
VST50 – 4
1
50
70
415V ± 12%
± 1.5%
700 380 810
136
VST60 – 4
1
60
84
415V ± 12%
± 1.5%
700 380 810
180
VST75 – 4
1
75
104
415V ± 12%
± 1.5%
815 475 1070
213
VST100 – 4
1
100
139
415V ± 12%
± 1.5%
815 475 1070
248
VST125 – 4
1
125
174
415V ± 12%
± 1.5%
815 475 1070
270
VST150 – 4
2
150
209
415V ± 12%
± 1.5%
1490 660 580
385
remarks: The dimensions indicated above is applicable for Automatic Voltage Stabilizer only. Please refer to the staff for power line conditioner dimensions if required.
Note: All specification are subject to change without prior notice for product improvement. Images, pictures, and illustrations used are for illustrative purposes only and the color printed in the brochure may differ from the actual product.
V-Series Automatic Voltage Stabilizer
voltage fluctuation
In the real world power line voltage occurs frequently especially in industrial area. Every electrical equipments and devices do have a working voltage limit/tolerance. Some equipment are build to tolerate ±10% of nominal voltage while others ±5% or less depending on sensitivity.
effects
The correct operation of electrical and electronic equipment depends on the voltage accuracy and stability. In the event of long time over voltage, it will lead to damage of the equipment; while long time under voltage will cause malfunction and computation errors of the electrical & electronic equipment.
Download Catalog
Description
V-Series Automatic Voltage Stabilizer
Downloadsolutions
Installing QPS Automatic Voltage Stabilizer (AVS) or power line conditioner will ensure the continuity and
quality of production.
Input voltage variation from:
Single Phase: 230VAC ±12%
Three Phase: 415VAC ±12% + Neutral (3 phase 4 wire)
– excellent output voltage accuracy of within ±1.5% set value.
– regulation correction time approximately 0.05 ~ 0.07 sec per volt.
– minimum maintenance due to its simplicity in design.
– easy installation.
– tailor made to special voltages and configuration for example, three phase voltage without neutral or for outdoor configurations.
QPS Servo – Motor Automatic Voltage Stabilizer provides a continuous monitoring of the output voltage
(true RMS sensing) by means of an electronic Control Circuit that compares the instantaneous output voltage with the set value. When changes are detected due to fluctuation of supply voltage or sudden changes in load, an electrical signal will be transmitted to the servo – motor which is coupled onto the brush gear of the variable transformer, causes the brush gear to rotate until the appropriate voltage is restored. This method of stabilization does not create interference or harmonic to the supply system. QPS Three phase Automatic Volltage Stabilizer also designed to cater for unbalanced load. This made possible with its independent phase monitoring system.
QPS Automatic Voltage Stabilizer offer high quality performance at competitive prices. They solve voltage unstable problems and increase productivity.
power line conditioner
QPS power line conditioner (PLC) is a AVS with the inclusion of a shielded isolation transformer.
technical data
input voltage
· single phase: 230V ±12%
· three phase: 415V ±12% + neutral
output voltage (true rms)
· single phase: 230VAC ± 1.5%
· three phase: 415VAC ± 1.5%
rated kva
· single phase: 1KVA ~ 30KVA
· three phase: 3KVA ~ 150KVA
output waveform/ distortion
· sinewave/follow input
response time
· 0.05 ~ 0.07 sec/V
frequency
· 50 / 60Hz
efficiency
· > 95%
over current protection
· MCB / MCCB
operating temperature
· 0°C ~ 45°C
SPD surge protection
· 1 phase standard
· 3 phase (optional)
phase loss sensing protection
· phase sensing relay (optional)
automatic output delay on system
· time delay (optional)
applications
· CNC wire-cut / EDM
· CNC drilling machine
· CNC milling machine
· X – Ray equipment
· Industrial robots
· Communication system
· PLC equipment
· Broadcasting equipment
· Photographic processing equipment
· Photocopy machine
· Test equipment
· Computers
· Medical equipment
· LAB equipment
standard features
· over current circuit breaker
· analog voltmeter
· phase indicator lamps
· phase selector switch for voltmeter (for three phase only)
optional features
· surge protection device (SPD)
· phase loss (3 phase model) c/w programmable under / over voltage detector / phase sequence monitoring
· automatic output delay on system
· manual bypass switch
single phase standard fittings
single phase models
standard fittings come with phase pilot lamp, over current breaker and voltmeter with selector switch.
input termination
power cord c/w 13A BS 3 pin plug – (model 1KVA , 2KVA & 3KVA)
power cord c/w 15A BS 3 pin plug – (model 4KVA)
terminal block for hardwire – (model 5KVA ~ 30KVA)
output termination
13A BS 3 pin socket – (model 1KVA ~ 5KVA)
terminal block for hardwire – (model 3KVA ~ 30KVA)
three phase standard fittings
over current breaker – (model 3KVA ~ 150KVA)
voltmeter input – line / phase voltage – (model 30KVA ~ 150KVA)
voltmeter output – (model 3KVA ~ 150KVA)
phase pilot lamp, input and output termination
terminal block – (model 3KVA ~ 150KVA)
diagram
Single Phase & Three Phase Servo – Motor Voltage Stabilizer Block Diagram
dimension
single phase V-series 230VAC
technical specification
h w d
(+/-)
remarks: The dimensions indicated above is applicable for Automatic Voltage Stabilizer only. Please refer to the staff for power line conditioner dimensions if required.
dimension
three phase V-series 415VAC
technical specification
h w d
(+/-)
remarks: The dimensions indicated above is applicable for Automatic Voltage Stabilizer only. Please refer to the staff for power line conditioner dimensions if required.
Note: All specification are subject to change without prior notice for product improvement.
Images, pictures, and illustrations used are for illustrative purposes only and the color printed in the brochure may differ from the actual product.